Thanks to our structural steel frames, you can install lifts in places without a masonry lift shaft, in existing buildings, in stairwells or, for instance, in the courtyard of a residential block.
Our frames can be used indoors, outdoors or in special environments, to satisfy all needs.
Self-bearing metal structure for lifts made from bent sheet metal standards, cross-section 120x120x4 mm and bent sheet metal cross beam, cross-section 100x46 mm, one every 1.50 m. The use of open profiles makes for fast detection of any rust spots and thus more efficient maintenance. The structure is assembled using special highstrength bolts, thus avoiding the need for welding during installation; also supplied with anchor brackets.
The entire metal structure is painted with rust-proofing. Buffering on three sides using sandwiched glass approved for use in lifts and with individual markings.
