Hydraulic lift
Capacity 250 Kg. |
Trave
Not above 11000 mm. |
Standard platform net dimensions
900x1200 mm. |
Speed
0,10 - 0,15m/sec. |
Power supply
220 V single phase 50 Hz |
Lighting
Automatic switching on spots light |
Car push buttons
Key switch activation - continous pressure control push button
for floor selection; alarm, and emergency lighting. |
Landing push buttons
Key switch activation - continous pressure push buttons at each
floor for lift call and free / in use light. |
Handrail
On the platform wall mounted |
Car floor
Anti-sliding material |
Movement
Piston hydraulic system |
Electric system
Earth leakage circuit breaker |
Alarm
Sound alarm |
Controller
For two stops with landing stop devices |
Ram and cylinder
In steel as well as piping |
Hydraulic unit
Including pump, valves and motor |
Guide system
Through cold drawn guides, bolted to the hoistway wall |
Security
Down speed is limited by means of a security valve built in the
hydraulic power unit. A further valve installed in the lower part of
the cylinder limits the fall down speed in case of hydraulic
connection breaking. Rescue device lets platform come back to
the lowest floor operating from car or from central unit. |
